A Guide to Retrofitting Soft Close Pocket Doors

Pocket doors are an ingenious space-saving solution that can add a touch of elegance to any home. However, traditional pocket doors can be noisy and prone to slamming shut, which can be quite a nuisance. Thankfully, with the advent of soft close retrofit kits, you can now upgrade your pocket doors to include a smooth and quiet closing mechanism. In this blog post, we will explore the benefits of retrofitting soft close pocket doors, the steps involved in the installation process, and some tips to ensure a successful retrofit. So let's dive in!

The Benefits of Soft Close Pocket Doors

Soft close pocket doors offer several advantages over their traditional counterparts. Firstly, they eliminate the annoying slamming noise that is often associated with pocket doors. This is particularly beneficial in homes with children or light sleepers. Additionally, soft close mechanisms prevent wear and tear on the door frame, as the door is gently guided into the pocket rather than forcefully slammed shut. Moreover, soft close systems reduce the risk of finger injuries by ensuring the door closes slowly and smoothly. Overall, retrofitting your pocket doors with a soft close mechanism brings added convenience and safety to your living space.

The Installation Process

Retrofitting soft close pocket doors can be a straightforward process if you follow the necessary steps. Here is a general outline of the installation process:

  1. Begin by removing the existing pocket door from its track.
  2. Clean the track thoroughly to ensure smooth operation of the new soft close mechanism.
  3. Install the soft close retrofit kit onto the door frame according to the manufacturer's instructions.
  4. Reattach the pocket door onto the track, making sure it aligns properly with the frame.
  5. Test the door to ensure the soft close mechanism is functioning correctly.
  6. Make any necessary adjustments to ensure optimal performance.

It's important to note that the specific installation steps may vary depending on the manufacturer and the type of soft close retrofit kit you choose. Therefore, always refer to the provided instructions for the most accurate guidance.

Tips for a Successful Retrofit

Retrofitting soft close pocket doors can be a DIY project, but here are some tips to ensure a successful installation:

  • Measure the dimensions of your pocket door and choose a compatible soft close retrofit kit.
  • Read and understand the installation instructions before starting the retrofit process.
  • Ensure you have the necessary tools and equipment for the installation.
  • Take your time during the installation process to avoid any mistakes.
  • Test the functionality of the soft close mechanism thoroughly before considering the project complete.

By following these tips, you can achieve a smooth and successful retrofit of your pocket doors.

In Conclusion

Retrofitting soft close pocket doors is a worthwhile investment that enhances the functionality and aesthetics of your home. With the elimination of noisy slamming and the added convenience of a gentle closing motion, soft close pocket doors bring an element of sophistication to any space. By following the installation steps and applying the provided tips, you can upgrade your pocket doors with ease. So why not consider retrofitting your pocket doors today and enjoy the benefits for years to come?

soft close pocket door retrofit

Bi-Fold Door

LOW PRICE BEST DESIGN GOOD QUALITY FAST DELIVERY

The load bearing capacity is up to 400kg per panel, which will satisfy the demand for larger opening space, and offer superior visual enjoyment. Any arrangements of opening ways are available for products less than 6 panels, which meets the needs of custom design.

Hold handle down:Sliding doors sit on rails to hold the doors in place Pull the hand up:Sliding doors create a distance from the track, allowing for smoother sliding

DESIGN OPTIONS

Material

Wood

Aluminum

Aluminum Clad Wood


Finishes

Anodizing

Electrostatic Spraying Coating

Powder Coating

Fluorocarbon Coating

3D Wood Grain Transfer


Glass

Low-E

Medi Empty

Laminated

Tempered


Hardware

Maco

Roto

Sobinco

Hoppe

Siegenia


Grilles

External Glazing Bars

Integral(Thermo)

Duplex

Suface Mounted


DOORWIN THE LEADING WINDOWS DOORS MANUFACTURER

Freedom to dream "truly custom-made"

Doorwin provides one-stop solution for professional windows doors manufacturer and installation. We have been serving customers with our high quality and branded products in United States, Asia and worldwide.

YOUR BESPOKE PLAN’S SOLVER

Our team of experts will work with you to develop a bespoke plan that fits your needs. We take a holistic approach to the planning process, combining our technical expertise with our knowledge of customer requirements and project constraints.

Full Custom Fenestration System

Find the true freedom to bespoke

Doorwin is the manufacturer of full custom fenestration systems, and we're here for you. We provide you with the freedom to design your windows, doors, and more with no additional charge for special shapes, hardware styles, and color choices. Your vision is our inspiration; our job is to make it a reality.
Our products are made to pass your local inspector's verification and are built under USA building codes so you can rest assured that they are safe and sturdy. Choose Doorwin to experience the best bespoke fenestration service available today!

Design Assistance Service

From manufacturing to delivery on site

We take care of the entire process for you, from beginning to end. We have our own expertise and will provide free-charge design development & contract documentation with CAD and BIM drawings. In addition to elevation details and installation design, we will double-check that the products match the drawings and project specifications through video or pictures. We'll help you specify the delivery schedule and logistics service whilst keeping costs to a minimum.

The Safest Delivery

5 layers packaging guarantee 0 damage

We're proud to be one of the top exporters of windows and doors to the United States. We pack each window individually and in four layers, and finally into wooden boxes with non-fumigation, and at the same time, there will be a lot of shockproof measures in the container to protect your items. We ensure that your products will arrive at the sites in good condition after long-distance transportation.
Doorwin has been exporting tens of millions of dollars of windows and doors to the U.S. every year, and we know that improper packaging can cause breakage of the product when it arrives on site. What the client concerns, we concern most.

What Projects Can We Take?

We are tested by the following standards:
-NFRC (North American Fenestration Rating Council)
-AAMA (American Architectural Manufacturers Association)
-WNMA (Wood National Monument Association)
-CSA101 (Canadian Standards Association)
-I.S.2 (International Standard ISO/IEC 17025)
-A440-11 (Standard for Fire Testing of Door Assemblies for Charging Rooms)

Related Products

COOPERATE WITH US NOW GET THE BEST QUOTE

Tag: