Casement windows are a popular choice for homeowners due to their versatility, energy efficiency, and stylish appearance. One of the key components of a casement window is the crank assembly, which allows the window to open and close smoothly. In this blog post, we will delve into the world of casement window crank assemblies, covering everything from installation and maintenance to troubleshooting common issues.
Before you begin the installation process, it's essential to gather the necessary tools and materials. You will need a casement window crank assembly kit, a drill, drill bits, a screwdriver, screws, a tape measure, a level, and a pencil.
1. Remove the old crank assembly: If you are replacing an existing crank assembly, start by removing it from the window. Unscrew the handle and any other hardware attached to the window. Carefully remove the old crank assembly, taking note of how it was installed.
2. Measure and mark: Measure the distance from the edge of the window to the center of the crank assembly hole. This measurement will help you determine the correct placement for the new assembly. Use a level to ensure the markings are straight and even.
3. Drill pilot holes: Using a drill bit slightly smaller than the screws provided in the crank assembly kit, drill pilot holes in the marked locations. This will make it easier to install the screws and prevent the wood from splitting.
4. Attach the crank assembly: Place the new crank assembly over the pilot holes, ensuring it is aligned with the markings. Attach the assembly to the window using the provided screws, tightening them securely.
5. Install the handle: Attach the handle to the crank assembly by inserting it into the hole and tightening the set screw.
6. Test the window: Open and close the window to ensure the crank assembly is functioning smoothly and securely.
Proper maintenance is crucial for the longevity and smooth operation of your casement window crank assembly. Follow these tips to keep your crank assembly in top shape:
1. Clean regularly: Dirt and debris can accumulate in the crank assembly, causing it to become stiff or difficult to operate. Clean the assembly with a damp cloth and mild detergent, taking care to remove any buildup.
2. Lubricate moving parts: Apply a silicone-based lubricant to the moving parts of the crank assembly, including the gears and hinges. This will help to reduce friction and ensure smooth operation.
3. Inspect for damage: Regularly inspect the crank assembly for signs of wear or damage, such as bent or broken parts. If you notice any issues, address them promptly to prevent further damage.
4. Tighten screws: Over time, screws can become loose, causing the crank assembly to become unstable. Check the screws regularly and tighten them as needed.
Despite proper installation and maintenance, you may encounter issues with your casement window crank assembly. Here are some common problems and their solutions:
1. Window won't open or close: If the window is difficult to open or close, check for obstructions in the track or around the crank assembly. Clean and lubricate the assembly as needed. If the problem persists, the gears may be worn or damaged and require replacement.
2. Handle spins without moving the window: If the handle spins but the window does not move, the gears inside the crank assembly may be stripped. In this case, the assembly will need to be replaced.
3. Crank assembly is loose: If the crank assembly is loose or wobbly, check the screws for tightness. If the screws are secure but the problem persists, the assembly may be damaged and require replacement.
4. Window won't stay open: If the window won't stay open, the friction hinge may be worn or damaged. Replace the hinge to restore proper function.
By following the steps outlined in this guide, you can ensure the proper installation, maintenance, and troubleshooting of your casement window crank assembly. With a bit of care and attention, your casement windows will continue to operate smoothly and efficiently for years to come.
Casement windows are the most common style of window. They feature hinged panels that swing open and closed. Casement windows are available in single panels or multiple panels. The direction a door swings, either to the right or the left, is called the handing. In addition to handing, window are identified as either inswing or outswing depending on whether they open into the house or towards the outside.
Our team of experts will work with you to develop a bespoke plan that fits your needs. We take a holistic approach to the planning process, combining our technical expertise with our knowledge of customer requirements and project constraints.
Doorwin provides one-stop solution for professional windows doors manufacturer and installation. We have been serving customers with our high quality and branded products in United States, Asia and worldwide.
This newly built private house is in Sydney, Australia. The area occupied by the fenestration system in our scheduled design drawings was up to more than 110 square meters. A wide range of design details made the perfect mix of modern aesthetics and traditional sophistication, the simulated vertical hung windows with tilt & turn opening systems in this home are absolutely breathtaking. SDLS (Simulated Divided Lites with Spacer Bar) brings some historical vintage feeling to the whole building without losing any energy saving performance. Long narrow fixed windows creating larger-than-life expenses, coupled with German high-end systems made this project stand out from the rest.
The client's idea was to maintain a certain vintage feel, and our aim was to meet the energy efficiency needs and standards of modern houses as much as possible while maintaining a retro design. Doorwin’s 61S simulated hung windows with tilt & turn openings is a respectful modernization of a classic architectural masterwork.
Why choose the tilt and turn opening method?
Because it generally has better air seals than sliding, single hung, or double hung window frames. Tilt and turn windows form a complete seal when fully closed, this means they are less prone to water leakage, and cold draughts and you’ll keep more of your heating indoors where it belongs. They can be opened in the upper tilt way to ventilate at a minimum opening status and are easy to clean outside of the glass; when there’s a good day, they can be opened as normal inward casement windows.
Our well-crafted bespoke systems enhance the functionality and panoramic view of this modern house.
Huge, fixed glass walls up to seven meters long and two meters high bring great lighting and open views, making it really refreshing to the mind. Five meters high long narrow windows give the whole building a contemporary aesthetic.
Every window’s placement and shape not only add to the uniqueness of this home but also provide a more energy-saving ability for the owners.
Doorwin energy-efficient integrated glazing units feature double-pane glass, warm-edge spacers, argon gas fill, Low-E coatings, and fully tempered glass, they can not only create a comfortable and natural indoor environment but also save electricity bills and heating bills of more than 100 USD for the owner, it’s a real bargain compared to choosing a regular glazing set.
Aluminum Door offered an air of uniqueness and elegance to a home. With their luxurious patterns and beautiful finishes, it provides this house with a bounty of aesthetics and security. Aluminum entry doors allow you to resist any weather extremes, corrosion, and pests. So aluminum is one of the most resilient and durable materials you can select for front doors considering the price/performance ratio.
With pieces of double panes, and Low-E tempered glass. The door provides a good insulation performance.
Divided lite windows and doors offer unique architectural solutions for buildings without compromising energy efficiency or aesthetics. Doorwin provides multiple muntin and glass options to customize your divided lite windows and doors. Further customization is available with a variety of colors and materials, creating an infinite number of design combinations to best suit your style.
In this project, we use SDLS (simulated divided lites with spacer bars), these bars permanently adhere to both sides of the glass, and spacer bars are installed between the glass, this is the most energy-efficient way to create the look of classical décor grilles. The windows in the bathroom bedroom and study have an Arch Transom Design, making these rooms, which are often used by the owner, have some traditional aesthetics.
BTW, Doorwin offers free design assistance, so if you need a custom design like this one, contact us right away and we will provide you with the most aesthetically and functionally pleasing design solution.
For windows and doors, hardware is as important as the engine is to the car. The continuous technological innovation of the European hardware industry has strongly promoted the performance improvement and functional innovation of windows and doors. In this project, Doorwin uses Hoppe™ multi-point locks, hinges, and handles from Germany.
Multi-point lock systems provide not only the burglar-resistance but also a tighter compression seam, making the window keeps good energy-efficient performance. Together with Technoform Bautec’s insulation edge bond and sealant strips, these make up our products' top insulation and energy-saving performance.
We have several international patents to reduce clients’ labor costs, such as our unique flanges and assembly type tubular design, which is different from the other products on the market. What sets us apart among Chinese counterpart is that all our products are equipped with nail fin structures for quick and easy installation. Labor costs during installation may exceed of the window and door price, therefore, our exclusive patent allows users to not only get a significant increase in installation efficiency, but also greatly reduce the labor cost of window and door installation. A cost that may bring you unexpected savings that far exceed the price difference you may care about now.
With our own expertise, we provided the no-cost design development and contract documentation with CAD & BIM drawings, including elevation, details about the project, and installation help.
Before production, we will provide accurate sample drawings, which will clearly show the cross-sectional pattern, size, opening method and direction, pattern of the warm spacer, and the installation nodes. We will not go into production until you have signed off on the drawing to ensure that you receive a final product that meets the exact requirements of your project.
Doorwin's professional packing system guarantees all products are delivered safely and without any damage. We apply a four-point packing system. Firstly, adhesive plastic film is applied on interior wood frames and exterior aluminum frames to avoid scratches on the surface. Then, a paper board is applied after we apply air bubble film surrounding the whole windows/ doors to avoid any destruction or clash. Lastly, we place them into a durable non-fumigation plywood crate to avoid any possible damage during transportation.
With years of experience shipping our products worldwide, we could guarantee to ship our products to their final destinations intact and without any damage.
Doorwin is one of the most professional window & door manufacturers are known for its great customized products. In Doorwin, a variety of colors, styles, and sizes of products are available to meet the client’s unique requirements. We own three ISO9000-certified modern factories in China. With a factory area of 20,000 m2 and a production capacity of 100,000 m2 per year. Doorwin Group has the scale to ensure timely delivery and the flexibility to reduce manufacturing lead times to as short as 18 days.
Awning Windows
Bay & Bow Windows
Casement Windows
Creak Out Casement Windows
Specialty Shape Windows
Picture Windows
Single Double Hung Windows
Tilt & Turn Windows
Sliding Windows
Bi-Fold Windows
Gliding Patio Doors
Bi-Fold Doors
Lift and Slide 
Entry Doors
Swinging Doors
Pivot Doors
Garage Doors
Interior Doors
