Windows are the eyes of a home, and old Andersen casement windows are some of the most charming and timeless features found in historic houses. These windows have a unique design and functionality that make them a beloved architectural element for many homeowners. However, as they age, they may require some maintenance and replacement of parts to keep them in good working order. This comprehensive guide will help you identify and source the necessary components to preserve the beauty and functionality of your old Andersen casement windows.
Andersen Corporation, founded in 1903 by Danish immigrant Hans Andersen, has been a leading manufacturer of windows and doors for over a century. The company's casement windows, which feature a hinged sash that swings outward, have been a popular choice for homeowners due to their energy efficiency, ease of operation, and classic design.
Casement windows became particularly popular in the United States during the 1920s and 1930s, and many historic homes still have their original Andersen casement windows. These windows are known for their quality craftsmanship and durability, but as with any antique feature, they may require some attention and care to keep them looking and functioning at their best.
Before you can begin restoring your old Andersen casement windows, it's essential to identify the specific parts that need replacement or repair. Here are some of the key components you may encounter:
The sash is the movable part of the window that holds the glass. It consists of the stiles (vertical members) and rails (horizontal members), which are joined together with mortise and tenon joints. Over time, the sash may become damaged or warped, requiring repair or replacement.
Casement windows rely on hinges to allow the sash to swing open and closed. There are various types of hinges, including pivot hinges, butt hinges, and friction hinges. Depending on the age and style of your windows, you may need to replace the hinges if they become worn or damaged.
The operator is the mechanism that allows you to open and close the window. It typically consists of a crank handle, a gear, and an arm that attaches to the sash. If the operator becomes difficult to turn or doesn't properly engage the sash, it may need to be repaired or replaced.
Weatherstripping is a crucial component of casement windows, as it helps to seal gaps and prevent drafts. Over time, the weatherstripping can wear out or become damaged, leading to decreased energy efficiency and comfort. Replacing old weatherstripping is a relatively simple and cost-effective way to improve your windows' performance.
Casement windows often feature a variety of locks and latches to secure the sash in place when closed. These may include surface-mounted locks, flush bolts, and multi-point locking systems. If your locks or latches are damaged or not functioning correctly, you'll need to source replacement parts to ensure your windows are secure.
Once you've identified the parts that need attention, the next step is to locate replacement components. Here are some tips for finding the right parts for your old Andersen casement windows:
1. Check with Andersen Corporation: Andersen still manufactures many replacement parts for their older windows, so contacting the company directly is an excellent place to start. They can help you identify the specific parts you need and may even have them in stock.
2. Visit architectural salvage shops: Architectural salvage shops are treasure troves for old window parts. These stores specialize in collecting and selling materials from demolished or renovated buildings, and you may be able to find the exact components you need to restore your windows.
3. Search online: Many online retailers specialize in selling vintage and antique window parts. Websites such as eBay, Etsy, and specialty suppliers can be a valuable resource for finding the right components for your project.
4. Consult with a professional: If you're unsure about what parts you need or how to properly restore your windows, consider consulting with a professional who specializes in historic window restoration. They can help guide you through the process and ensure that your windows are restored to their former glory.
With the right parts in hand, you can begin the process of restoring your old Andersen casement windows. Whether you're tackling the project yourself or working with a professional, be sure to take your time and pay attention to detail. By carefully repairing or replacing damaged components, you can preserve the beauty and functionality of your windows for years to come.
In the end, restoring your old Andersen casement windows not only enhances the charm and character of your historic home but also helps to maintain its value and integrity. Embrace the unique features of your home and enjoy the satisfaction of preserving a piece of architectural history.
Casement windows are the most common style of window. They feature hinged panels that swing open and closed. Casement windows are available in single panels or multiple panels. The direction a door swings, either to the right or the left, is called the handing. In addition to handing, window are identified as either inswing or outswing depending on whether they open into the house or towards the outside.
Our team of experts will work with you to develop a bespoke plan that fits your needs. We take a holistic approach to the planning process, combining our technical expertise with our knowledge of customer requirements and project constraints.
Doorwin provides one-stop solution for professional windows doors manufacturer and installation. We have been serving customers with our high quality and branded products in United States, Asia and worldwide.
This newly built private house is in Sydney, Australia. The area occupied by the fenestration system in our scheduled design drawings was up to more than 110 square meters. A wide range of design details made the perfect mix of modern aesthetics and traditional sophistication, the simulated vertical hung windows with tilt & turn opening systems in this home are absolutely breathtaking. SDLS (Simulated Divided Lites with Spacer Bar) brings some historical vintage feeling to the whole building without losing any energy saving performance. Long narrow fixed windows creating larger-than-life expenses, coupled with German high-end systems made this project stand out from the rest.
The client's idea was to maintain a certain vintage feel, and our aim was to meet the energy efficiency needs and standards of modern houses as much as possible while maintaining a retro design. Doorwin’s 61S simulated hung windows with tilt & turn openings is a respectful modernization of a classic architectural masterwork.
Why choose the tilt and turn opening method?
Because it generally has better air seals than sliding, single hung, or double hung window frames. Tilt and turn windows form a complete seal when fully closed, this means they are less prone to water leakage, and cold draughts and you’ll keep more of your heating indoors where it belongs. They can be opened in the upper tilt way to ventilate at a minimum opening status and are easy to clean outside of the glass; when there’s a good day, they can be opened as normal inward casement windows.
Our well-crafted bespoke systems enhance the functionality and panoramic view of this modern house.
Huge, fixed glass walls up to seven meters long and two meters high bring great lighting and open views, making it really refreshing to the mind. Five meters high long narrow windows give the whole building a contemporary aesthetic.
Every window’s placement and shape not only add to the uniqueness of this home but also provide a more energy-saving ability for the owners.
Doorwin energy-efficient integrated glazing units feature double-pane glass, warm-edge spacers, argon gas fill, Low-E coatings, and fully tempered glass, they can not only create a comfortable and natural indoor environment but also save electricity bills and heating bills of more than 100 USD for the owner, it’s a real bargain compared to choosing a regular glazing set.
Aluminum Door offered an air of uniqueness and elegance to a home. With their luxurious patterns and beautiful finishes, it provides this house with a bounty of aesthetics and security. Aluminum entry doors allow you to resist any weather extremes, corrosion, and pests. So aluminum is one of the most resilient and durable materials you can select for front doors considering the price/performance ratio.
With pieces of double panes, and Low-E tempered glass. The door provides a good insulation performance.
Divided lite windows and doors offer unique architectural solutions for buildings without compromising energy efficiency or aesthetics. Doorwin provides multiple muntin and glass options to customize your divided lite windows and doors. Further customization is available with a variety of colors and materials, creating an infinite number of design combinations to best suit your style.
In this project, we use SDLS (simulated divided lites with spacer bars), these bars permanently adhere to both sides of the glass, and spacer bars are installed between the glass, this is the most energy-efficient way to create the look of classical décor grilles. The windows in the bathroom bedroom and study have an Arch Transom Design, making these rooms, which are often used by the owner, have some traditional aesthetics.
BTW, Doorwin offers free design assistance, so if you need a custom design like this one, contact us right away and we will provide you with the most aesthetically and functionally pleasing design solution.
For windows and doors, hardware is as important as the engine is to the car. The continuous technological innovation of the European hardware industry has strongly promoted the performance improvement and functional innovation of windows and doors. In this project, Doorwin uses Hoppe™ multi-point locks, hinges, and handles from Germany.
Multi-point lock systems provide not only the burglar-resistance but also a tighter compression seam, making the window keeps good energy-efficient performance. Together with Technoform Bautec’s insulation edge bond and sealant strips, these make up our products' top insulation and energy-saving performance.
We have several international patents to reduce clients’ labor costs, such as our unique flanges and assembly type tubular design, which is different from the other products on the market. What sets us apart among Chinese counterpart is that all our products are equipped with nail fin structures for quick and easy installation. Labor costs during installation may exceed of the window and door price, therefore, our exclusive patent allows users to not only get a significant increase in installation efficiency, but also greatly reduce the labor cost of window and door installation. A cost that may bring you unexpected savings that far exceed the price difference you may care about now.
With our own expertise, we provided the no-cost design development and contract documentation with CAD & BIM drawings, including elevation, details about the project, and installation help.
Before production, we will provide accurate sample drawings, which will clearly show the cross-sectional pattern, size, opening method and direction, pattern of the warm spacer, and the installation nodes. We will not go into production until you have signed off on the drawing to ensure that you receive a final product that meets the exact requirements of your project.
Doorwin's professional packing system guarantees all products are delivered safely and without any damage. We apply a four-point packing system. Firstly, adhesive plastic film is applied on interior wood frames and exterior aluminum frames to avoid scratches on the surface. Then, a paper board is applied after we apply air bubble film surrounding the whole windows/ doors to avoid any destruction or clash. Lastly, we place them into a durable non-fumigation plywood crate to avoid any possible damage during transportation.
With years of experience shipping our products worldwide, we could guarantee to ship our products to their final destinations intact and without any damage.
Doorwin is one of the most professional window & door manufacturers are known for its great customized products. In Doorwin, a variety of colors, styles, and sizes of products are available to meet the client’s unique requirements. We own three ISO9000-certified modern factories in China. With a factory area of 20,000 m2 and a production capacity of 100,000 m2 per year. Doorwin Group has the scale to ensure timely delivery and the flexibility to reduce manufacturing lead times to as short as 18 days.
Awning Windows
Bay & Bow Windows
Casement Windows
Creak Out Casement Windows
Specialty Shape Windows
Picture Windows
Single Double Hung Windows
Tilt & Turn Windows
Sliding Windows
Bi-Fold Windows
Gliding Patio Doors
Bi-Fold Doors
Lift and Slide 
Entry Doors
Swinging Doors
Pivot Doors
Garage Doors
Interior Doors
