A Guide to Double Action Pivot Hinge Installation and Maintenance

Double action pivot hinges are an essential component in various applications such as doors, gates, and cabinets. This blog post will provide you with a comprehensive guide on the installation and maintenance of double action pivot hinges, ensuring smooth operation and longevity of your hinges.

What is a Double Action Pivot Hinge?

A double action pivot hinge, also known as a double acting pivot hinge, is a type of hinge that allows a door or gate to swing in both directions. It provides a convenient and efficient solution for areas where doors need to swing freely in both directions, such as commercial buildings or busy kitchens.

Installation Process

Installing double action pivot hinges requires careful attention to detail to ensure proper functionality. Here is a step-by-step guide:

  1. Begin by marking the desired location for the hinges on the door and frame. Ensure they align properly to allow the door to swing freely.
  2. Drill pilot holes at the marked locations to prevent splitting when inserting the screws.
  3. Attach the hinges to the door using the provided screws, making sure they are securely fastened.
  4. Hold the door in the desired position and mark the corresponding locations on the frame for hinge installation.
  5. Drill pilot holes into the frame and attach the hinges, aligning them with the hinges on the door.
  6. Test the swing of the door to ensure it moves freely and smoothly in both directions.

Maintenance Tips for Double Action Pivot Hinges

Proper maintenance is crucial to keep your double action pivot hinges functional and extend their lifespan. Here are some essential maintenance tips:

  • Regularly inspect the hinges for any signs of wear, such as loose screws or damaged components.
  • Tighten any loose screws using a screwdriver to ensure the hinges remain securely in place.
  • Apply a silicone-based lubricant to all moving parts of the hinge to reduce friction and promote smooth operation.
  • Remove any dirt, dust, or debris using a soft cloth or brush, as they can hinder the hinge's performance.
  • Check the overall alignment of the hinges and make necessary adjustments if the door starts to sag or bind.

Common Issues with Double Action Pivot Hinges

Despite their durability, double action pivot hinges may encounter certain issues over time. Here are a few common problems and their solutions:

1. Squeaking Hinges

If your double action pivot hinges produce squeaking sounds, apply a lubricant to all moving parts. If the noise persists, try tightening the hinge screws or replacing them if necessary.

2. Misaligned Doors

If the door starts to sag or bind, it may be due to misaligned hinges. Carefully examine the hinges and make necessary adjustments to restore proper alignment.

3. Loose Door

In some cases, the door may become loose and not close properly. Tighten the screws on both the door and frame hinges to secure the door in place and restore proper functionality.

By following these installation and maintenance tips, you can ensure the longevity and smooth operation of your double action pivot hinges. Remember to regularly inspect and maintain them to avoid potential issues and enjoy the benefits of a functional and hassle-free door or gate.

double action pivot hinge

DOORWIN THE LEADING WINDOWS DOORS MANUFACTURER

Freedom to dream "truly custom-made"

Doorwin provides one-stop solution for professional windows doors manufacturer and installation. We have been serving customers with our high quality and branded products in United States, Asia and worldwide.

WHY CHOOSE DOORWIN?

With Doorwin, you can have all of this with a simple move. This is because we believe that the best way to achieve your goals is by working with
our customers to find solutions to their problems.Our team of designers and engineers are dedicated to solving these problems by creating
products that are designed to be easy to install, easy to maintain and repair, while being cost-effective.

Certifications & Test Reports

Over 50 USA & EU fenestration certifications and test reports.

25 Years Warranty

TPS glazing ensures that no air leakage and fogging issues for 25 years warranty.

We are Experienced

More than 4000 high-end bespoke fenestration projects in North America.

Best Bargain You Get

Doorwin products meanwhile with half price compared with your local dealers.

YOUR BESPOKE PLAN’S SOLVER

Our team of experts will work with you to develop a bespoke plan that fits your needs. We take a holistic approach to the planning process, combining our technical expertise with our knowledge of customer requirements and project constraints.

Full Custom Fenestration System

Find the true freedom to bespoke

Doorwin is the manufacturer of full custom fenestration systems, and we're here for you. We provide you with the freedom to design your windows, doors, and more with no additional charge for special shapes, hardware styles, and color choices. Your vision is our inspiration; our job is to make it a reality.
Our products are made to pass your local inspector's verification and are built under USA building codes so you can rest assured that they are safe and sturdy. Choose Doorwin to experience the best bespoke fenestration service available today!

Design Assistance Service

From manufacturing to delivery on site

We take care of the entire process for you, from beginning to end. We have our own expertise and will provide free-charge design development & contract documentation with CAD and BIM drawings. In addition to elevation details and installation design, we will double-check that the products match the drawings and project specifications through video or pictures. We'll help you specify the delivery schedule and logistics service whilst keeping costs to a minimum.

The Safest Delivery

5 layers packaging guarantee 0 damage

We're proud to be one of the top exporters of windows and doors to the United States. We pack each window individually and in four layers, and finally into wooden boxes with non-fumigation, and at the same time, there will be a lot of shockproof measures in the container to protect your items. We ensure that your products will arrive at the sites in good condition after long-distance transportation.
Doorwin has been exporting tens of millions of dollars of windows and doors to the U.S. every year, and we know that improper packaging can cause breakage of the product when it arrives on site. What the client concerns, we concern most.

WELCOME TO BE OUR DEALER

Doorwin experts are experienced in working with architects, builders and homeowners to ensre your vision becomes a reality.Welcome to visit a showroom, ask questions about product pricing, request a quote and more.

Through Collaborations And Partnerships,we Amplify Our Impact

INSPIRATION & SOLUTION

What Projects Can We Take?

We are tested by the following standards:
-NFRC (North American Fenestration Rating Council)
-AAMA (American Architectural Manufacturers Association)
-WNMA (Wood National Monument Association)
-CSA101 (Canadian Standards Association)
-I.S.2 (International Standard ISO/IEC 17025)
-A440-11 (Standard for Fire Testing of Door Assemblies for Charging Rooms)

FIND YOUR INSPIRATION HERE

Doorwin is a company that specializes in custom-made doors and windows. We understand that every home is unique, and we are committed to providing you with the highest quality products possible.Our products are inspired by different lifestyles, and we respect your vision when designing them. Our designs are made specifically for you, so there is no additional cost. We work across styles and profiles, whether you're remodeling an old house or designing your new dream home. Find inspirations here and we will fulfill all your imaginations.

COOPERATE WITH US NOW GET THE BEST QUOTE

Tag: