How to Remove Vertical Sliding Window from Frame

Vertical sliding windows are a popular choice for many homes, providing an elegant and functional feature. However, there may come a time when you need to remove these windows for various reasons. Whether you are replacing them, performing maintenance, or simply cleaning, knowing how to safely remove and reinstall vertical sliding windows is essential. In this blog post, we will guide you through the step-by-step process of removing vertical sliding windows from their frame.

Step 1: Preparation

Before starting the removal process, gather the necessary tools:

• Gloves
• Safety glasses
• Flathead screwdriver
• Putty knife
• Wood blocks (optional)

Step 2: Remove the Sash

The sash is the movable part of the window that holds the glass. Follow these steps:

1. Open the window fully.
2. Locate the tilt latches on the window sash, typically situated on the sides or corners.
3. Depress the tilt latches simultaneously using your fingers or a flathead screwdriver.
4. Tilt the window sash toward the interior of the room.
5. Gently lift the sash upward to release it from the frame.
6. Place the removed sash in a safe location.

Step 3: Remove the Fixed Panel

The fixed panel is the stationary part of the window that does not open. Here's how to remove it:

1. Locate any screws or fasteners securing the fixed panel to the frame, if applicable.
2. Using a screwdriver, carefully remove these screws and set them aside.
3. Insert a putty knife between the fixed panel and the frame to loosen it.
4. Gently pry the fixed panel away from the frame, ensuring not to damage the surrounding materials.
5. Once loose, lift the fixed panel out of the frame.

Step 4: Clean and Inspect

With the window removed, take the opportunity to clean the frame thoroughly using a mild soap and water mixture. Inspect the frame for any signs of damage or wear, and address them accordingly. This step helps maintain the longevity of your window and keep it looking its best.

Step 5: Reinstalling the Window

After completing the necessary cleaning and repairs:

1. Position the fixed panel back into the frame.
2. Make sure the panel aligns properly and fits securely.
3. If applicable, reinsert any screws or fasteners removed earlier to secure the fixed panel.
4. Reinsert the sash by aligning it with the window frame.
5. Push the sash downward until it locks into place.
6. Test the window to ensure it opens, closes, and locks correctly.

By following these steps, you can successfully remove and reinstall vertical sliding windows from their frame. Remember to exercise caution throughout the process and, if you are unsure about any step, consult a professional for guidance.