Certifications & Test Reports
Over 50 USA & EU fenestration certifications and test reports.
Wooden windows add a touch of classic elegance to any home, but over time, the glass in these windows can become damaged or worn out. When faced with the need to replace the glass in your old wood windows, it's important to approach the task carefully to ensure a seamless and long-lasting result. In this blog post, we will guide you through the process of replacing glass in old wood windows, providing step-by-step instructions and helpful tips along the way.
Before starting the glass replacement process, gather all the tools and materials you'll need. This includes safety goggles, gloves, a putty knife, a heat gun, glazing compound, glass cutter, and new glass panes. Make sure to wear appropriate protective gear throughout the process to minimize the risk of injury.
Begin by removing the old glass from the window frame. Carefully use a putty knife to remove any glazing compound or old putty holding the glass in place. Take your time and be gentle to avoid damaging the wood frame. Once the glazing compound is removed, gently tap the glass to loosen it and carefully remove it from the frame.
After removing the old glass, inspect the window frame for any signs of damage or decay. Repair or replace any deteriorated wood to ensure a solid foundation for the new glass. Sand down any rough edges or imperfections on the frame and clean it thoroughly before proceeding.
Using a glass cutter, measure and cut the new glass pane according to the dimensions of the window frame. Take accurate measurements and ensure a snug fit. Remember to wear protective gloves while handling the glass to avoid any injuries caused by sharp edges.
Apply a thin layer of glazing compound to the frame, making sure to cover the entire area where the glass will be placed. Carefully place the new glass pane into the frame and press it firmly to create a secure bond with the glazing compound. Remove any excess compound using a putty knife and give it some time to dry and harden.
Once the glazing compound has fully dried, finish the job by painting the frame to match the surrounding woodwork. Use high-quality paint and apply multiple coats for a professional and long-lasting finish. Step back and admire your newly replaced glass in the old wood window frame.
To ensure the longevity of your newly replaced glass, it's important to maintain it properly. Regularly clean both the inside and outside of the glass using a mild glass cleaner and a soft cloth. Inspect the glazing compound for any signs of cracking or deterioration and repair as needed. By taking proper care of your wood windows and the glass within, you can enjoy their beauty and functionality for years to come.
In conclusion, replacing glass in old wood windows requires careful attention to detail and the use of proper techniques. By following the steps outlined in this blog post, you can successfully replace the glass in your old wood windows and revive their charm. Remember to prioritize safety and take your time throughout the process for the best results. Enjoy the beauty and functionality of your newly replaced glass in the timeless elegance of your wooden windows!
replacing glass in old wood windowsWith Doorwin, you can have all of this with a simple move. This is because we believe that the best way to achieve your goals is by working with
our customers to find solutions to their problems.Our team of designers and engineers are dedicated to solving these problems by creating
products that are designed to be easy to install, easy to maintain and repair, while being cost-effective.
Over 50 USA & EU fenestration certifications and test reports.
TPS glazing ensures that no air leakage and fogging issues for 25 years warranty.
More than 4000 high-end bespoke fenestration projects in North America.
Doorwin products meanwhile with half price compared with your local dealers.
Our team of experts will work with you to develop a bespoke plan that fits your needs. We take a holistic approach to the planning process, combining our technical expertise with our knowledge of customer requirements and project constraints.
Doorwin is the manufacturer of full custom fenestration systems, and we're here for you. We provide you with the freedom to design your windows, doors, and more with no additional charge for special shapes, hardware styles, and color choices. Your vision is our inspiration; our job is to make it a reality.
Our products are made to pass your local inspector's verification and are built under USA building codes so you can rest assured that they are safe and sturdy. Choose Doorwin to experience the best bespoke fenestration service available today!
We take care of the entire process for you, from beginning to end. We have our own expertise and will provide free-charge design development & contract documentation with CAD and BIM drawings. In addition to elevation details and installation design, we will double-check that the products match the drawings and project specifications through video or pictures. We'll help you specify the delivery schedule and logistics service whilst keeping costs to a minimum.
We're proud to be one of the top exporters of windows and doors to the United States. We pack each window individually and in four layers, and finally into wooden boxes with non-fumigation, and at the same time, there will be a lot of shockproof measures in the container to protect your items. We ensure that your products will arrive at the sites in good condition after long-distance transportation.
Doorwin has been exporting tens of millions of dollars of windows and doors to the U.S. every year, and we know that improper packaging can cause breakage of the product when it arrives on site. What the client concerns, we concern most.
Doorwin experts are experienced in working with architects, builders and homeowners to ensre your vision becomes a reality.Welcome to visit a showroom, ask questions about product pricing, request a quote and more.
We are tested by the following standards:
-NFRC (North American Fenestration Rating Council)
-AAMA (American Architectural Manufacturers Association)
-WNMA (Wood National Monument Association)
-CSA101 (Canadian Standards Association)
-I.S.2 (International Standard ISO/IEC 17025)
-A440-11 (Standard for Fire Testing of Door Assemblies for Charging Rooms)
Doorwin is a company that specializes in custom-made doors and windows. We understand that every home is unique, and we are committed to providing you with the highest quality products possible.Our products are inspired by different lifestyles, and we respect your vision when designing them. Our designs are made specifically for you, so there is no additional cost. We work across styles and profiles, whether you're remodeling an old house or designing your new dream home. Find inspirations here and we will fulfill all your imaginations.